350-801試験無料問題集（390題）「Cisco Implementing and Operating Cisco Collaboration Core Technologies 認定」

出題：1

Which two descriptions of TFTP option 66 and 150 for Cisco IP phones are true? (Choose two.)

A. Option 150 supports multiple entries of TFTP server IP addresses, but option 66 supports only one of TFTP server DNS names.

B. Option 150 supports multiple entries of TFTP server IP addresses, but option 66 supports only one entry of either TFTP server IP address or DNS name.

C. Option 150 is Cisco proprietary, but option 66 is standard-based.

D. Option 150 and 66 are standard-based.

E. Option 150 supports only TFTP server IP addresses, but option 66 supports only TFTP server DNS names.

F. Option 66 is Cisco proprietary, but option 150 is standard-based.

正解：B,C 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：2

User A calls user B.
The call gets connected, but the quality is bad. What are two reasons for this issue? (Choose two.)

A. No region relationship

B. Incorrect partition

C. Incompatible codec

D. Incorrect QoS

E. Network congestion

正解：D,E 解答を投票する

出題：3

Which access control group is required on an end user to allow Jabber to do deskphone mode?

A. Standard CTI Secure Connection

B. Standard CTI Allow Reception of SRTP key Material

C. Allow control of device from CTI

D. Standard CTI Enabled

正解：D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：4

Refer to the exhibit. A call is failing to establish between two SIP Devices. The Called device answer with this SDP.
Which SDP parameter causes this issue?

A. The media stream is set to sendonly.

B. The RTP port is set to 0.

C. The calling device did not offer a ptime value.

D. The payload for G.711ulaw must be 18.

正解：B 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：5

How does an administrator make Cisco IP phone display the lest 10 digits of the calling number when the call is in the connected state, and also display the calling number in the E.164 format within call history on the phone?

A. Change the service parameter Apply Transformations On Remote Number to True.

B. Configure a translation pattern that has a calling Party Transform Mask of XXXXXXXXXX.

C. On the inbound SIP trunk, change Significant Digits to 10.

D. Configure a calling party transformation pattern that keeps only last 10 digits.

正解：A 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：6

An engineer is configuring a BOT device for a Jabber user is Cisco Unified Communication Manager.
Which phone type must be selected?

A. third-party SIP device

B. Cisco Dual mode for Android

C. Cisco Unified Client services Framework

D. Cisco Dual Mode for iPhone

正解：B 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：7

Which dial plan function restricts calls that are made by a lobby phone to internal extensions only?

A. endpoint addressing

B. calling privileges

C. path selection

D. manipulation of dialed destination

正解：B 解答を投票する

出題：8

Where is the default for maximum session Bit Rate for a region configured?

A. Service parameter configuration

B. Region configuration

C. Enterprise parameters configuration

D. Enterprise Phone configuration

正解：A 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：9

A collaboration engineer adds a voice gateway to Cisco UCM. The engineer creates a new gateway device in Cisco UCM, selects VG320 as the device type and selects MGCP as the protocol. What must be done next to add the gateway to the Cisco UCM database?

A. Configure the module in slot 0 of the new gateway

B. Select the DTMF relay type for the gateway

C. Add the FQDN or hostname of the device

D. Select a device pool for the new gateway

正解：C 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：10

An administrator is integrating a Cisco Unity Express module to a Cisco UCME system A test call is placed to the Cisco Unity Express pilot number, but the administrator receives a busy signal.
The dial- peer is configured as follows:

How is this issue resolved?

A. The dial-peer needs to be reconfigured to support vad.

B. The dial-peer needs to be reconfigured to support the G.711 voice codec.

C. The dial-peer needs to be reconfigured to support H 323 instead of SIP.

D. The destination pattern needs to be changed to match the dialed number of 4100.

正解：B 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：11

An engineer must configure a dial plan tor a new Cisco UCM cluster. Standard local route groups must be used for all local calls. After the route pattern, route list and route groups are configured, which settings must the engineer configure for the standard local route groups?

A. voice gateway

B. device pool

C. SIP trunk

D. trunk group

正解：B 解答を投票する

出題：12

Which two functions are provided by Cisco Expressway series? (Choose two.)

A. voice and video conferencing

B. voice and video transcoding

C. intercluster extension mobility

D. endpoint registration

E. interworking of SIP and H.323

正解：D,E 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：13

Refer to the exhibit. Which codec should an engineer select for a call made between `Dallas- REG` & `Austin-REG`?

A. OPUS

B. G.729

C. G.711

D. MP4A-LATM

正解：B 解答を投票する

出題：14

Where would an administrator update learned patterns from the DNA UI?

A. Service -> Control Center -> DNA

B. Service -> Control Center

C. System -> Enterprise parameters

D. System -> Service Parameters

正解：B 解答を投票する

出題：15

An administrator would like to set several Cisco Jabber configuration parameters to only apply to mobile clients (iOS and Android). How does the administrator accomplish this with Cisco Jabber
12.9 and Cisco UCM 12.5?

A. Create a user profile in Jabber Policies.

B. Assign the desired configuration file to "Mobile" Jabber Client Configuration in the Service Profile.

C. Upload the jabber-config.enc file to TFTP

D. Deploy jabber-config-user.xml on iOS and Android devices.

正解：B 解答を投票する

出題：16

When multiple potential patterns are present, which two things are considered when Cisco UCM selects a destination pattern? (Choose two.)

A. The pattern matches the shortest explicit prefix.

B. The pattern represents the smallest number of endpoints.

C. The pattern represents the largest number of endpoints.

D. The pattern matches the dialed string.

E. The pattern does not match the dialed string.

正解：B,D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：17

What is a function of a call handler in Cisco Unity Connection?

A. It collects information from callers by playing a series of questions and recording the answers.

B. It answers calls, take messages, and provide menus of options.

C. It controls outgoing calls by allowing an administrator to specify the numbers that Cisco Unity Connection dials to transfer calls, notify users of messages, and deliver faxes

D. It provides access to a corporate directory by playing an audio list that users and outside callers use to reach users and leave messages.

正解：B 解答を投票する

350-801試験無料問題集「Cisco Implementing and Operating Cisco Collaboration Core Technologies 認定」