350-601試験無料問題集（587題）「Cisco Implementing Cisco Data Center Core Technologies (350-601 DCCOR) 認定」

出題：1

An engineer must allow communication between the APIC controller and an OpenStack OpFlex agent. The agent is running on a compute node directly plugged to a Cisco ACI leaf switch. The engineer must enable and extend Infra VLAN on the port facing the compute and extend the Infra VLAN to the host. Which action must be taken to meet these requirements?

A. Enable the Infra VLAN on the Attachable Access Entity Profile.

B. Add the infra VLAN via the VMM domain.

C. Enable the Infra VLAN on the Interface Profile policy

D. Add the infra VLAN via the physical domain.

正解：D 解答を投票する

出題：2

When deploying a Cisco HyperFlex edge with a pair of switches, what is the minimum number of interfaces in trunk mode required on each HX node?

A. 2

B. 1

C. 4

D. 6

正解：A 解答を投票する

出題：3

An engineer must implement the FCoE on the Cisco Nexus 9000 Series Switch-based infrastructure. The deployment will contain dual-homed fabric extenders and must support jumbo frames with port channels. Which two sets of actions complete the configuration? (Choose two.)

A. Create a FCoE switch profile.
Enable config sync.

B. Configure the interface with mtu 9516.
Disable the feature NPIV.

C. Create a virtual Fibre Channel Interface.
Bind vFC to physical interface.

D. Create a dedicated VSAN for FEX.
Bind VSAN to FEX uplinks.

E. Execute fcoe enable-fex.
Configure FEX uplinks with mtu 9216.

正解：C,E 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：4

An engineer is duplicating an existing Cisco UCS setup at a new site.
What are two characteristics of a logical configuration backup of a Cisco UCS Manager database? (Choose two.)

A. contains the AAA and RBAC configurations

B. contains the configured organizations and locales

C. contains a file with an extension tgz that stores all of the configurations

D. contains the VLAN and VSAN configurations

E. contains all of the configurations

正解：B,D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：5

Refer to the exhibit. Service degradation is reported on a VM that is deployed on a Cisco UCS blade server. The traffic from the vNIC is required to SPAN in both directions to a packet analyzer that is connected to UCS-A slot 2 port 12.
Which two commands are needed to complete the configuration? (Choose two.)

A. UCS-A /eth-traffic-mon/fabric/eth-mon-session* # create eth-mon-session/dest-interface 2 12

B. UCS-A /org/service-profile/vnic/mon-src* # set direction both

C. UCS-A /org/service-profile/vnic/mon-src* # set direction receive transmit

D. UCS-A /eth-traffic-mon/fabric/eth-mon-session' # create dest-interface 2 12

E. UCS-A /eth-traffic-mon/fabric/eth-mon-session # activate

正解：B,D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：6

An engineer must implement protection against ICMP DoS attacks on a Cisco Nexus 9000 Series Switch. The requirement is to rate-limit ICMP without denying all other ICMP traffic. The ICMP trafic currently passing through the Cisco Nexus 9000 device must not be affected.
Which configuration accomplishes these goals?

A. Configure SNMP traps to send the ICMP notification if the CPU utilization is more than 90%.

B. Apply a control plane service policy that matches all ICMP traffic to drop the traffic fiat exceeds the threshold.

C. Reconfigure the Layer 3 interfaces to be in the non-default VRF and ICMP broadcast storm control

D. Create an access list to deny ICMP traffic and apply it to all interlaces in the inside direction.

正解：B 解答を投票する

出題：7

An engineer configures an intersignt virtual application and must claim over 200 targets. The engineer starts the Claim target procedure. The engineer has prepared this initial comma- separated value file to provision the targets:
UCSFI,10.1.1.3,user-1,pwd5516b917
IMC,10.1.1.5/26,user-2,pwdc65b1c43f
HX,10.1.2.1/30,user-3,pwd39913690
UCSD,1.1.1.1.user-4,pwd5003e9d5
Which Information must be included In the comma-separated value flit to provision the targets?

A. target type, hostname or P address, user name, password

B. certificate, user name, password. email

C. location, address, name. password

D. FQON, AD name, IP address, email

正解：A 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：8

An engineer must create an EPG called "Test". The configuration request should succeed if the Tenant called "Tenant" and the application profile called "Test" exist. The firewall policy allows only the HTTP connectivity to APIC from the user's computer.
Which action accomplishes this goal?

A. Option D

B. Option C

C. Option A

D. Option B

正解：B 解答を投票する

出題：9

Drag and Drop Question
Refer to the exhibit. In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
- R1 must be the active RP.
- R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.

正解：

Explanation:
* It's important the RP address is NOT the loopback address but one of the other address in the subnet defined on the loopback
* By default, OSPF advertises all loopbacks as /32 so the need of 'ip ospf network point-to-point' command to advertise the subnet mask
* We hardcode the OSPF RID to avoid any duplicate RID problem in case address of Loopback1 is the highest loopback
* There is a need to define a mapping agent for auto-rp to work (not shown here)
* BSR doesn't support yet the possibility to advertise as candidate RP an IP address which is not defined on any interface. This implies that BSR cannot be used with phantom RP. We need to use either Auto-RP or static RP.

出題：10

An engineer must design an automation solution for the Cisco ACI Fabric to speed up the deployment of logical network elements for tenant provisioning. When creating a solution, the engineer must keep in mind that the tool must support these requirements:
* Allow the rapid creation and removal of logical containers.
* Support the creation of custom modules and data structures.
* Be extensible with external libraries and modules.
* Allow rapid testing of code using an on-demand execution environment.
Which automation tool meets these requirements?

A. Python

B. Chef

C. SaltStack

D. YAML

正解：C 解答を投票する

出題：11

Refer to Exhibit. An engineer must use the python module in the guest shell of the Cisco Nexus
9000 Series switch to shutdown port Ethernet ?
Which command set will accomplish this?

A. Option D

B. Option C

C. Option A

D. Option B

正解：D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：12

Which component is upgraded by using an EPLD upgrade on a Cisco Nexus 9000 Series Switch?

A. dual-homed fabric extenders

B. ISSU of the NX-OS version

C. field-programmable gate arrays

D. BIOS

正解：C 解答を投票する

350-601試験無料問題集「Cisco Implementing Cisco Data Center Core Technologies (350-601 DCCOR) 認定」