D-NWR-DY-23試験無料問題集（715題）「EMC Dell NetWorker Deploy 23 認定」

出題：1

A customer wants to use REST API to manage their Linux-based NetWorker backup server.
How should the administrator respond?

A. No additional configuration is required

B. REST API cannot be used to manage NetWorker server

C. Install the lgtorestapi-[version].rpm package

D. Install the lgtoxtdclnt-[version].rpm package

正解：A 解答を投票する

出題：2

Which daemons are present on an EMC NetWorker storage node to which a tape library is configured?

A. nsrjobd, nsrmmdbd, nsrd, nsrsnmd

B. nsrjobd, nsrmmd, nsrlcpd, nsrindexd

C. nsrexecd, nsrsnmd, nsrindexd, nsrlcpd

D. nsrexecd, nsrsnmd, nsrlcpd, nsrmmd

正解：D 解答を投票する

出題：3

An EMC NetWorker server has been configured to stage from an adv_file type device upon reaching a high water mark of 80%.
After the staging begins, which rule determines when the staging process ends?

A. All save sets older than the max storage period are moved

B. Staging destination volume reaches full capacity

C. Capacity must fall below the low water mark

D. Capacity must fall below the high water mark

正解：C 解答を投票する

出題：4

In an EMC NetWorker environment, the NetWorker server is not part of an enabled backup group.
What is the sequence of events when automatic cloning is enabled for a client's backup group?

A. 1. All save sets are backed up.
2. Bootstrap save set is backed up.
3. All save sets are cloned.
4. Bootstrap save set is cloned.

B. 1. All save sets are backed up.
2. All save sets are cloned.
3. Bootstrap save set is backed up.
4. Bootstrap save set is cloned.

C. 1. All save sets are cloned.
2. All save sets are backed up.
3. Bootstrap save set is backed up.
4. Bootstrap save set is cloned.

D. 1. All save sets are backed up.
2. All save sets are cloned.
3. Bootstrap save set is cloned.
4. Bootstrap save set is backed up.

正解：B 解答を投票する

出題：5

In EMC Networker what will automatically mount and label a scratch volume when needed?

A. nsrmmdb

B. Dynamic Drive Sharing

C. nsrjb

D. Auto Media Management

正解：D 解答を投票する

出題：6

An EMC NetWorker customer has two LTO-3 tape drives configured on a NetWorker server. One of the two tape drives is dynamically shared with a NetWorker storage node.
The other tape drive is statically assigned to the NetWorker server. The shared drive stops functioning on the NetWorker server but continues to function on the storage node.
How many nsrmmd processes need to be running on the storage node?

A. 2

B. 1

C. 4

D. 3

正解：B 解答を投票する

出題：7

An EMC NetWorker administrator configures an advanced file type device, setting the device target sessions to two, and max sessions to four.
How is data written to the advanced file type device?

A. Four backup jobs will be multiplexed for every two files written to the device.

B. Each save set is written to a separate file.

C. Two save sets will be stored in each file.

D. Each file written by the storage node contains up to four save sets.

正解：B 解答を投票する

出題：8

After adding a few clients over a number of weeks, the backups have been queuing up and going past the backup window. The administrator has been asked to review and adjust NetWorker configuration to allow enough sessions, so the backups complete on time without going into the queue.
Clone window is not a concern at this time.
They checked the configuration and have determined the following.
Server Parallelism = 80
Number of devices = 9
Backup devices = 6
Clone devices = 3
Target session on each device = 4
Max session on each device = 8
There is a total of 21 clients, each with a client parallelism = 4
After doing the calculations, what needs to be done?

A. Increase the server parallelism to 84 and device target session on each backup device to 14

B. Increase the target session for each backup device to 14

C. Increase max session for each backup device to 14

D. Increase the server parallelism to 84 and device max session on each backup device to 14

正解：D 解答を投票する

出題：9

A backup administrator is configuring EMC NetWorker Snapshot Management backups of a client in their NetWorker environment. The administrator wants a snapshot of the client's disk volume to be taken and then backed up to traditional media from a remote proxy host.
The snapshot volume should be deleted immediately after the backup to traditional media.
Which type of backup should be configured?

A. Snapshot and rollover

B. Snapshot only

C. Virtual synthetic full

D. Rollover only

正解：D 解答を投票する

出題：10

What is a characteristic of Dell EMC Networker MEDITECH backups?

A. Only supports tape and Data Domain devices

B. Only supports integrated serverless backups

C. Integrates with the Backup Facilitator

D. Supports remote replicas without requiring RecoverPoint

正解：D 解答を投票する

出題：11

What is recommended when configuring EMC NetWorker module clients?

A. Use the same pool for application and file system backups of module clients

B. Assign all module clients to the same group and schedule

C. Use the same group for application and file system backups of module clients

D. Assign all module clients to the same group and pool

正解：D 解答を投票する

出題：12

What databases does the NMDA Backup and Recovery feature support for NSM snapshot backups?

A. IBM DB2 and IBM Domino

B. Oracle and IBM Domino

C. Oracle and IBM DB2

D. Oracle and Sybase

正解：C 解答を投票する

出題：13

You have an EMC NetWorker server with one storage node. There is an autoloader with four tape drives. Two drives each are dedicated to the server and storage node. A new Celerra has been added to the network with 500 GB of data.
What must be done to back up the data on the Celerra?

A. Configure a client for the Celerra to use DSA and back up its data to either the NetWorker server or storage node.

B. Configure a device on the NetWorker server as an NDMP device and back up the Celerra to this device.

C. Create an NDMP backup pool and add this pool to a save group with other clients.

D. Create a storage node on the Celerra and select NDMP in the "type of storage node" field.

正解：A 解答を投票する

出題：14

What is a feature of the CloudBoost appliance?

A. replaces the PowerProtect DDVE appliance

B. replaces the PowerProtect DD series appliance

C. enables the transfer of backups to cloud storage

D. enables the transfer of backups to Dell EMC Cloud Tier

正解：C 解答を投票する

出題：15

A Dell EMC NetWorker backup administrator runs a client-initiated save backup with option-1 incremental.
Which backup level is displayed during this backup?

A. Manual

B. Full

C. Ad-hoc

D. Incremental

正解：D 解答を投票する

出題：16

What should be done to enable load balancing of EMC NetWorker backups across multiple storage nodes?

A. Select the 'Dynamic nsrmmds' attribute in the storage node properties

B. Add the storage nodes to the 'Storage Nodes' field on the client resource

C. Increase the client parallelism value on the storage node client

D. Set the 'Save session distribution' field to target sessions

正解：D 解答を投票する

D-NWR-DY-23試験無料問題集「EMC Dell NetWorker Deploy 23 認定」