DES-1415試験無料問題集「EMC Specialist - Technology Architect, PowerScale Solutions 認定」
A customer plans to replace an existing array that is supported by the MiTrend Workload Profile Assessment (WPA) service. You receive performance data from the customer and run a WPA report that shows the array has 50TB of usable capacity.
In discussions with the customer, you learn the content is comprised of four million 6MB files and 400 million 64KB files. The customer explains they have a small budget and very limited rack space available in their datacenter. Performance is not a concern because the files are rarely accessed.
Which configuration provides the needed usable capacity using N+2:1 protection, and requires the least amount of rack space?
Response:
In discussions with the customer, you learn the content is comprised of four million 6MB files and 400 million 64KB files. The customer explains they have a small budget and very limited rack space available in their datacenter. Performance is not a concern because the files are rarely accessed.
Which configuration provides the needed usable capacity using N+2:1 protection, and requires the least amount of rack space?
Response:
正解：A
解答を投票する
An Isilon customer is experiencing less than expected performance and poor space utilization with their cluster. They are using the X400 nodes with an N+2d:1n protection policy to host web server log data.
Upon further analysis, the customer discovers that the web servers write log files 64KiB in size. The log files are then accessed by an analytics application for reporting purposes.
What should be done to increase the write performance of the cluster?
Response:
Upon further analysis, the customer discovers that the web servers write log files 64KiB in size. The log files are then accessed by an analytics application for reporting purposes.
What should be done to increase the write performance of the cluster?
Response:
正解：D
解答を投票する
We have been engaged by a research hospital to help upgrade their Isilon installation. They currently have 12 previous generation Isilon nodes with 200 TB of capacity and run on a 1 Gbps network.
They currently have 6 Illumina Hi-Seq Sequencers and an HPC cluster to process dat a. They would like to expand Isilon to 2 PB of active data and 1 PB of archive data. They use a third party data and metadata management service (IRODs) to stage data for analysis. The Isilon cluster is mainly used for analysis work with the HPC cluster.
The customer will add two more Illumina Hi-Seq Sequencers in the next 6 months. Once these are added, what is the total amount of data from all the sequencers they can expect to add per month?
Response:
They currently have 6 Illumina Hi-Seq Sequencers and an HPC cluster to process dat a. They would like to expand Isilon to 2 PB of active data and 1 PB of archive data. They use a third party data and metadata management service (IRODs) to stage data for analysis. The Isilon cluster is mainly used for analysis work with the HPC cluster.
The customer will add two more Illumina Hi-Seq Sequencers in the next 6 months. Once these are added, what is the total amount of data from all the sequencers they can expect to add per month?
Response:
正解：D
解答を投票する
Your customer manages a print media environment, consisting of three Isilon clusters, which are out of support. The customer would like to have access to new software releases and feature sets. You have been asked to perform a full discovery of the customer's environment.
The customer's current Isilon clusters are as follows:
"Cust" (12 x 12000X) serves as upload media storage for different tenants.
"Working" (8 x 12000X + 6 x X200) serves as a working zone for extraction to RAW and printing media from it.
"Archive" (16 x 72NL + Accelerator nodes) is used to store printed content for six months.
The customer operates in a Windows environment using SMB 2.0, two DNS servers per AD forest, three forest domains which are servicing three different environments. All servers are operating on a 1Gb network, three VLANs segregating the DEV/QA/PROD environments. Currently, there is no monitoring in place for performance measurement or optimization.
The requirements for this solution include:
- Better ROI and TCO
- Maintain same performance with possible improvements
- Renew HW/SW and get inclusive support
- Limit migrations
- Reduce space, power, cooling consumption
- Get new feature sets
- If migration required, use Parallel copy (multiple nodes, multiple threads multiple connections)
- Segregate tenant shares from other tenants
- Expand up to 1PB of total storage
Which licenses need to be defined for the solution to perform optimally?
Response:
The customer's current Isilon clusters are as follows:
"Cust" (12 x 12000X) serves as upload media storage for different tenants.
"Working" (8 x 12000X + 6 x X200) serves as a working zone for extraction to RAW and printing media from it.
"Archive" (16 x 72NL + Accelerator nodes) is used to store printed content for six months.
The customer operates in a Windows environment using SMB 2.0, two DNS servers per AD forest, three forest domains which are servicing three different environments. All servers are operating on a 1Gb network, three VLANs segregating the DEV/QA/PROD environments. Currently, there is no monitoring in place for performance measurement or optimization.
The requirements for this solution include:
- Better ROI and TCO
- Maintain same performance with possible improvements
- Renew HW/SW and get inclusive support
- Limit migrations
- Reduce space, power, cooling consumption
- Get new feature sets
- If migration required, use Parallel copy (multiple nodes, multiple threads multiple connections)
- Segregate tenant shares from other tenants
- Expand up to 1PB of total storage
Which licenses need to be defined for the solution to perform optimally?
Response:
正解：D
解答を投票する
