A. Reduces connectivity loss.
B. Reduces network complexity.
C. Detects the loss of downstream connectivity.
D. Prevents the loss of upstream connectivity.
A. There was no issue; this is normal behavior.
B. One of the upstream interfaces is an uplink-state group went down.
C. Both a port channel and its members were assigned to an uplink-state group.
D. Spanning tree Loop-guard was implemented on the uplink-state group.
A. It will send an ICMP packet to attempt to reach its 10.0.2.1 neighbor.
B. The router will not form a successful adjacency with its 10.0.2.1 neighbor.
C. The router will form a successful adjacency with its 10.0.2.1 neighbor. The BGP state will be listed as connect.
D. It will send gratuitous ARP messages to attempt to discover a route to its 10.0.2.1 neighbor.
A. S2(config)# router bgp 64507S2(config-router-bgp-64507)# remote-as 64507S2(config-router-bgp-64507)# neighbor 192.168.32.1 S2(config-router-neighbor)# update-source loopback 0 S2(config-router-neighbor)# no shutdown
B. S2(config)# router bgp 64507S2(config-router-bgp-64507)# peer-as 64507S2(config-router-bgp-64507)# neighbor 192.168.32.1 S2(config-router-neighbor)# update-source loopback 0 S2(config-router-neighbor)# no shutdown
C. S2(config)# router bgp 64507S2(config-router-bgp-64507)# neighbor 192.168.32.1S2(config-router-neighbor)# remote-as 64507 S2(config-router-neighbor)# update-source loopback 0 S2(config-router-neighbor)# no shutdown
D. S2(config)# router bgp 64507S2(config-router-bgp-64507)# neighbor 192.168.32.1S2(config-router-bgp-64507)# remote-as 64507 S2(config-router-bgp-64507)# update-source loopback 0 S2(config-router-bgp-64507)# no shutdown
A. Broadcast
B. Unicast
C. ACK
D. Multicast
A. OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown OS10(conf-if-eth1/1/3)# ip address 144.254.1.2/30 OS10(conf-if-eth1/1/3)# no switchport OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0 OS10(config)# router ospf 1
B. OS10(config)# router ospf 1OS10(config-router-ospf-1)# router-id 1.1.1.1 OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown OS10(conf-if-eth1/1/3)# no switchport OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0
C. OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown OS10(conf-if-eth1/1/3)# ip address 144.254.1.2/30 OS10(conf-if-eth1/1/3)# no switchport OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0 OS10(conf-if-eth1/1/3)# router ospf 1
D. OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown OS10(conf-if-eth1/1/3)# no switchport OS10(conf-if-eth1/1/3)# ip address 144.254.1.2/30 OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0 OS10(config)# router ospf1