ハイパスレート

近年、GB0-381-ENUテスト連続は好評を博しており、すべての献身的な努力で99％の合格率に達しています。 より多くの労働者がより高い自己啓発を進めるための強力なツールとして、GB0-381-ENU認定トレーニングは高度なパフォーマンスと人間中心の技術への情熱を追求し続けています。 さまざまな種類の受験者がH3C Large-Scale Routing Network Technologies V2.0認定を受けるのをどのように手助けするかを理解するために多くの研究が行われてきました。 シラバスの変更および理論と実践における最新の動向に従って、H3C Large-Scale Routing Network Technologies V2.0ガイドの連続を修正して更新します。 私たちは、厳密な分析を通じて、近年のテストと業界の動向に基づいてGB0-381-ENU認定トレーニングを行います。

信頼できる売り上げ後のサービス

最高のGB0-381-ENUテスト連続を提供することにおける世界的なリーダーとして、我々は大多数の消費者に包括的なサービスを提供することに専念して、そして統合されたサービスを構築するよう努めます。 さらに、GB0-381-ENU認定トレーニングアプリケーション、インタラクティブ共有、アフターサービスでも画期的な成果を上げました。 実際のところ、私たちの会社はすべてのクライアントのフィッティングソリューションに対する困難を考慮に入れています。 あなたが助けを必要とする限り、H3C Large-Scale Routing Network Technologies V2.0ガイドの連続に関する問題のいずれかに対処するための即時サポートを提供します。 いつでも利用可能です。 私たちの責任あるスタッフが質問に答えてくれます。

H3C Large-Scale Routing Network Technologies V2.0 認定 GB0-381-ENU 試験問題:

1. As shown in the figure, RTA has configured each interface address and enabled the NAT-PT function. It is now required to configure a one-to-one static NAT-PT mapping on the RTA, which of the following configurations is correct?

A) RTA]natpt v6bound static 1::2 1.1.1.3 RTA]natpt v4bound static 1.1.1.3 1::3
B) RTA]natpt v6bound static 1::2 1.1.1.2 RTA]natpt v4bound static 1.1.1.3 1::3
C) RTA]natpt v6bound static 1::2 1.1.1.3 RTA]natpt v4bound static 1.1.1.2 1::3
D) RTA]natpt v6bound static 1::3 1.1.1.3 RTA]natpt v4bound static 1.1.1.2 1::2

2. The output of displaospfv3 on a router is as follows
Routing Process OSPFv3 (1) with ID 1.1.1.1
Graceful restart helper enabled
Graceful restart helper srtict-lsa-checking disabled
SPF schedule dela5 secs, Hold time between SPFs 10 secs
Minimum LSA interval 5 secs, Minimum LSA arrival 1 secs
Number of external LSAs 0. These external LSAs checksum Sum 0x0000
Number of AS-Scoped Unknown LSA 0
Number of LSA originated 19
Number of LSA received 0
Number of areas in this router is 3
Area BACKBONE(0)
Number of interfaces in this area is 2
SPF algorithm executed 9 times
Number of LSA 3. These LSAs checksum Sum 0x6C29
Number of Unknown LSA 0
Area 0.0.0.1
Number of interfaces in this area is 1
SPF algorithm executed 12 times
Number of LSA 3. These LSAs checksum Sum 0x22F1E
Number of Unknown LSA 0
Area 0.0.0.10
Number of interfaces in this area is 1
SPF algorithm executed 1 times
Number of LSA 3. These LSAs checksum Sum 0x81E2
Number of Unknown LSA 0
Then the router has ________ interfaces in the OSPFv3 process.

A) 2
B) 1
C) 4
D) 3

3. Regarding the LSDB in the OSPF protocol, the following statement is correct is ________.

A) After completing the LSA exchange, the LSDBs of the routers in the same area should be consistent
B) There are as many LSDBs as there are areas in the router, and the link state description information received from different areas is stored in separate LSDBs
C) The function of LSDB is to record all the link state description information received by the router
D) When the route changes, the router should first update its own LSDB according to the update message received, and then update the routing table

4. The networking is as shown in the figure, eBGP runs between AS 100, AS 200, and AS 300, and ATM links between RTC and RTA, and RTC and RTB are connected. 2M line as backup, how to implement it on RTC?

A) RTC filters all BGP routes learned from RTA and accesses AS 100 through AS 200
B) RTC filters the MED attribute from BGP, the MED of the route learned from RTA is set to 200, and the MED of the route learned from RTB is set to 100
C) No need to adjust BGP properties, RTC will automatically select the path with high bandwidth
D) Adjust the BGP LP attribute on RTC, set the LP of the route learned from RTA to 100, and set the LP of the route learned from RTB to 200

5. In the topology shown in the figure, the following configurations are performed on RTA, RTB, RTC and RTD respectively:
RTA-LoopBack0] ip address 1.1.1.1 255.255.255.255
RTA]ospf 1
RTA-ospf-1]area 1
RTA-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTA-ospf-1]import-route direct
RTA-ospf-1]default-route-advertise alwa
RTB-LoopBack0] ip address 2.2.2.2 255.255.255.255
RTB]ospf 1
RTB-ospf-1]area 1
rtb-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTB-ospf-1-area-0.0.0.1]area 0
rtb-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
RTB-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
RTC-LoopBack0] ip address 3.3.3.3 255.255.255.255
rtc]ospf 1
RTC-ospf-1]area 0
RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
rtc-ospf-1-area-0.0.0.2]network 3.3.3.3 0.0.0.0
rtc-ospf-1-area-0.0.0.0]area 2
RTC-ospf-1-area-0.0.0.2]nssa no-summarRTC-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255
RTD-LoopBack0] ip address 4.4.4.4 255.255.255.255
RTD]ospf 1
RTD-ospf-1]area 2
RTD-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255
rtd-ospf-1-area-0.0.0.2]nssa
RTD-ospf-1]import-route direct
Which of the following routes _______ cannot exist in the RTD's routing table.

A) 1.1.1.1/32
B) 2.2.2.2/32
C) 3.3.3.3/32
D) 0.0.0.0/0

質問と回答：