HP2-Z18試験無料問題集（96題）「HP Network Infrastructure AIS 2011 認定」

出題：1

You have enabled IP routing on an-HP E8212 zI switch. You must configure the switch so that all packets with destination addresses not in its routing table are forwarded to 192.111.254.1. Which command accomplishes this task?

A. E8212 (config)# ip route 255.255.255.255 192.111.254.1

B. E8212 (config) # ip route 0.0.0.0/0 192.111.254.1

C. E8212 (config)# ip default-route 192.111.254.1

D. E8212 (config) # ip helper 192.111.254.1/24

正解：B 解答を投票する

出題：2

You must configure link aggregation on an HP E-Series switch with standby links to provide for link redundancy. Which technology is required for this configuration?

A. HP port trunking

B. static LACP

C. dynamic LACP

D. distributed trunking

正解：C 解答を投票する

出題：3

Which link aggregation protocol is supported by HP A-Series switches?

A. Multi-Link Trunking (MLT)

B. Port Aggregation Protocol (PAgP)

C. HP Port Trunking

D. Link Aggregation Control Protocol (LACP)

正解：D 解答を投票する

出題：4

What is a benefit of the customizable airflow feature on the HP E6600 switch series?

A. controls the volume of airflow

B. regulates airflow, based upon the number of active ports

C. ensures the switch's exhaust is directed away from other equipment in data center racks

D. relocates the power cord to the other side of the switch for ease of rack mounting

正解：B 解答を投票する

出題：5

You have enabled IP routing on an HP E8212 zl switch. You must configure the switch so that all packets with destination addresses not in its routing table are forwarded to 192.111.254.1. Which command accomplishes this task?

A. E8212(config)# ip route 0.0.0.0/0 192.111.254.1

B. E8212(config)# ip route 255.255.255.255 192.111.254.1

C. E8212(config)# ip default-route 192.111.254.1

D. E8212 (config)# ip helper 192.111.254.1/24

正解：A 解答を投票する

出題：6

You must configure an HP E3500 yl switch for installation in a network that uses a mix of STP and RSTP. What must you do to ensure that the E3500 will interoperate with other switches in this Spanning Tree?

A. Enter spanning-tree mode stp rstp in the configuration context of every port where the switch will hear Spanning Tree BPDUs.

B. Enter spanning-tree in the global configuration context.

C. Enter spanning-tree force-version all-stp-operation in the global configuration context.

D. Enter spanning-tree conf ig-revision stp in the configuration context for every VLAN the switch shares with another switch.

正解：B 解答を投票する

出題：7

Ports 1-4 on an HP E3500 yI switch are tagged members of VLAN 44 and untagged members of VLAN 45. What is the effect of the following command?
E3500 (config)# trunk. 1-4 trk3 lacp

A. trk3 will have no VLAN memberships until they are configured by an administrator

B. trk3 becomes an untagged member of VLAN 1 and a tagged member of VLAN 44

C. trk3 becomes a tagged member of VLAN 44 and an untagged member of VLAN 45

D. trk3 becomes an untagged member of VLAN 1 and has no other VLAN memberships

正解：D 解答を投票する

出題：8

You make configuration changes to the running configuration of your HP E3500 yI switch. Which command saves these changes to your startup configuration?

A. save running-config

B. write memory

C. copy running-config startup-config

D. write config

正解：B 解答を投票する

出題：9

Which configuration options are available in User view at the CLI of an HP A-Series switch? (Select two.)

A. enable SSH

B. configure management users

C. restart the switch

D. save configuration changes

E. define a VLAN

正解：C,D 解答を投票する

出題：10

Which security technology requires that you set read/write community names?

A. SMTP

B. SNMP

C. SFTP

D. HTTPS

E. SSH

正解：B 解答を投票する

HP2-Z18試験無料問題集「HP Network Infrastructure AIS 2011 認定」