NS0-520試験無料問題集（236題）「Network Appliance NetApp Certified Implementation Engineer

出題：1

Click the Exhibit button.

An administrator is trying to configure a multiple-hop Cisco MDS switch and is receiving the error shown in the exhibit.
In this scenario, which action will solve this problem?

A. Configure the physical link of interface ext17 as an F_Port.

B. Turn N_Port ID virtualization (NPIV) off.

C. Connect the external link to a Cisco MDS switch.

D. Configure the external interface to a different virtual SAN (VSAN) on both ends.

正解：C 解答を投票する

出題：2

What are two benefits of implementing VLANs for ISCSI configuration? (choose two)

A. Increased security

B. Reduced number of broadcast domains

C. Increased performance

D. Increased resiliency

正解：A,B 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：3

When does Fractional Reservation reserve space from the volume?

A. LUN Creation

B. LUN SnapMirror

C. Volume Snapshot

D. Volume Creation

正解：C 解答を投票する

出題：4

A customer wants to deploy NVMe/FC along with an existing FC SAN fabric using ONTAP 9.8. In this scenario, which two actions are correct? (choose two)

A. Create new zoning on fabric switches

B. Upgrade your FC switches from 16GB to 32GB

C. Use existing zoning on fabric switches

D. Enable NVMe/FC on the existing FC SVM

正解：C,D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：5

Which four FC fabric topologies does NetApp support? (Choose four.)

A. a switched fabric that has 65537 ports

B. ten FC switches per fabric, daisy chained with a single ISL between switches

C. four FC switches with multiple Inter-Switch Links (ISLs) between each pair of switches

D. four FC switches with multiple ISLs between ALL switches

E. eight FC switches with no more than a single ISL between switches in a cascade topology

F. dual FC switches with no ISLs

G. a single FC switch

正解：C,D,F,G 解答を投票する

出題：6

You are configuring a VMware sphere host for FC access to a Netapp ONTAP cluster. In this scenario, which two tasks does Netapp recommend performing on the Vsphere host? (choose two)

A. Set the queue depth on the host to 8

B. Update the HBA driver

C. Zone the host by using the host WWNNs

D. Use the Netapp Virtual Storage Console to configure the host settings

正解：B,D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：7

Exhibit.

The exhibit shows the Inn show command output for the oradata oraFinProd_l LUN.
Which two statements ate correct about the LUN'? (Choose two.)

A. The LUN Is thick provisioned.

B. The LUN type is Windows.

C. The LUN supports SCSI Tin unmap.

D. The LUN is thin provisioned.

正解：C,D 解答を投票する

出題：8

You are testing FCP paths failures on a 2-node Netapp AFF All SAN Array and verify that persistent ports are correctly enabled. Before testing, a host sees four optimized paths to a LUN. You perform a node takeover and re-check the host.
Which statement is true after the node takeover?

A. The host sees two non-optimized paths and two dead paths to the LUN

B. The host sees two optimized paths and two non-optimized paths to the LUN

C. The host sees four optimized paths to the LUN

D. The host sees two optimized paths and two dead paths to the LUN

正解：C 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：9

Which topology allows for guaranteed maximum network performance for iSCSI?

A. isolated VLAN network

B. WAN network

C. direct connect

D. MetroWAN network

正解：C 解答を投票する

出題：10

A user cannot add more than one NVMe data LIF in ONTAP 9.4 on an SVM with a data protocol parameter set to nvme.
In this scenario, what is the problem?

A. The SVM data protocol should be set to FC.

B. Only one NVMe data LIF can be configured per SVM.

C. A demo license is used.

D. The NVMe namespace is not created.

正解：D 解答を投票する

出題：11

Which two scenarios in deploying ONTAP Cloud are supported by the Cloud Manager tool? (Choose two.)

A. ONTAP Cloud deployed as an HA pair on Amazon Web Services

B. ONTAP Cloud deployed as an HA pair on VMware

C. ONTAP Cloud deployed as an HA pair on IBM Cloud

D. ONTAP Cloud deployed as a single instance on Microsoft Azure

正解：A,D 解答を投票する

出題：12

Referring to the exhibit, which security feature would guarantee that the host A system that is mapped to LUN XYZ on the NetApp storage system is the only host that access the LUN?

A. igroup setup with the IQN of the ISCSi software initiator on Host A.

B. IPsec configured on both host A and the NetApp Storage System

C. CHAP configured on HOST A and the NetApp Storage System

D. igroup setup with no IQNs

正解：C 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：13

You are about to replace a failed Brocade Fibre Channel switch. Which three steps do you take prior to connecting the switch in the SAN? (Choose three.)

A. Force the new switch to be the principle switch.

B. Change the domain ID of the replacement switch to the domain ID of the failed switch.

C. Preload the zoning information from the fabric onto the new switch.

D. Clear all zoning configurations on the replacement switch.

E. Change the core PID format of the replacement switch to the core PID format of the failed switch.

正解：B,D,E 解答を投票する

出題：14

You are configuring a FAS8300 HA pair running ONTAP 9.8 with two hosts that requires SAN LUNs. The cluster is in a secure data center without switches. In this scenario, which block protocol is supported on the hosts?

A. FCP

B. FCoE

C. NVMe

D. ISCSI

正解：D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：15

You create a 20 GB LUN in a newly created 100 GB FlexVol volume. You then write 5 GB of data to the LUN. You have space reservation disabled on the LUN.
In this scenario, how much space do you have left on the volume?

A. 95 GB

B. 75 GB

C. 85 GB

D. 80 GB

正解：A 解答を投票する

NS0-520試験無料問題集「Network Appliance NetApp Certified Implementation Engineer - SAN, ONTAP 認定」